Fill out the form below with the required information and we will get back to you shortly.
1x1-Limited Total Energy
Reference : 1401
The Soterix Medical 1×1 tDCS-LTE includes the most advanced transient protection in the industry should an electrode become temporarily disconnected, for example due to subject movement. In addition, should resistance increase to atypical levels, LTE-tDCS will automatically reduce the applied current so as to maintain a low voltage.
Warning: Last items in stock!
|Intensity||.5 mA, 1 mA, 1.25 mA, 1.5 mA|
|Duration||5 min, 10 min, 15 min, 20 min|
|True Current||Clearly indicates the actual current supplied at the moment|
|SMARTscan||Provides a continuous visual indication of electrode quality before and during stimulation|
|Tickle||May be used to supply a very weak current prior to tDCS to help condition the skin|
|Relax||Allows the clinician to use a simple sliding bar to transiently decrease the current from the pre-set value|
|LTE||Limited total energy provides adaptive ramp-up stimulation technology to limit the required voltage|
The Soterix Medical 1×1-LTE is the only tDCS device optimized for susceptible populations with features optimized to reduce anxiety and sensation including SmartScan™, Relax™, and Tickle™. Limited Total Energy for tDCS (LTE-tDCS) was developed exclusively by Soterix engineers. LTE limits the voltage and power required for tDCS through the use of adaptive ramp-up stimulation and intelligent energy management for currents up to 1.5 mA.
Advanced transient protection should an electrode become temporarily disconnected. LTE-tDCS will automatically reduce the applied current so as to maintain a low voltage should resistance increase to atypical levels.
From pre-stimulation set-up, to during stimulation monitoring, to post-stimulation confirmation, the Soterix Medical SmartScan™ feature provides an intuitive and clear indication of electrode contact quality. Use the SmartScan™ during set-up to adjust electrodes and head-gear for optimal fit. During stimulation, SmartScan™ provides a constant indication of electrode quality and can be monitored during adjustments (e.g. addition of saline to drying electrodes). After stimulation, SmartScan™ confirms a successful trial. Because “resistance” is not meaningful for tDCS, SmartScan™ was developed by Soterix Medical engineers to provide clinical investigators with a simple to read indication of contact quality.
What other devices promise, the 1×1 tDCS delivers. The back-lit display can be monitored during stimulation ramp up and to confirm target current intensity is achieved.
Tickle™ may be used to both condition skin prior to tDCS and for naïve subject anxious about stimulation. A custom on-off waveform pattern generates mild and brief sensation under electrodes.
Based on feed-back from leading clinical centers, Soterix Medical exclusive feature Relax™ accommodates subjects who may be anxious when stimulation is initiated or during the course of stimulation. The Relax™ slider may be adjusted from full to reduced intensity based on subject perception without interrupting or aborting stimulation.
An automatic stimulation sham feature that is engaged with a simple switch. Auto-sham automatically calculated and produces a sham waveform based on the the indicated “real” waveform. For example, for a corresponding real waveform of 1.5 mA and 10 minutes. auto-sham will provide a ramp up/down to 1.5 mA at the start of of stimulation, and again after 10 minutes, with the timer automatically adjusted such that the total run time us exactly matched to the real case. Based on the Soterix Medical OpenPanelTM design principle: with no complicated programming or hidden drop-down menus required.
Feel free to contact our engineers at Caputron to assist you with your endeavors, we would love to help!